epur OAKBOT EOX 4.2 Series, Руководство пользователя

Страница: 44 / 74

epur | USER’S MANUAL
www.epur.io - - | 44 | - - contact@epur.io
3. Put the clamps in place, one on each side
on the front so that they do not impede
the OAKBOT’s movements. Tighten the
clamps supplied to the maximum to hold
everything sufficiently tight in place
during the machining process. Check the
whole clamping system.
END MACHINING
1. Position your clamping module while
checking that the reference setting is respected along the 3 axes (see #7).
2. Actuate the pre-clamping lever; the lower table must butt up against the
lower surface of the wood.