Modello - Modèle - Model
Modell - Modelo
RUGIADA WINE&BEER
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
Unità Locale
Via A. Grandi, 43 -
15033 Casale Monferrato (AL)
Tel: +39 0142 436111 - Fax: +39 0142 781540
PAGE
30/64
N° DOC
UM000293
13. FURTHER INFORMATION
Take out packaging and clean all the cabinet using warm water together with 5% of neutral soap
then dry it with a soft cloth; for the glass parts only use specific products, avoiding the use of
water which can leave on the glasses limestone residues.
10
It is fundamental to comply with the distances indicated
(cm) for correct installation of the equipment.
Ventilation openings must be kept unobstructed in order
to allow the unit to work properly and for safety reasons.
• Cabinet must be installed on a perfectly even surface,
far away from any heat source (radiators, stoves, etc)
including sun rays.
•
It is necessary that the capacitor unit is in the free air
exchange condition, therefore the ventilation zones must
not be obstructed by boxes or otherwise.
•
Install and position the unit in such a way so as to allow
easy access to the power socket.
• Never place containers of liquid on or immediately above
the ticket counter; should the content spill out, it would
damage the counter.
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING
IN DANGEROUS ENVIRONMENT WITH RISK OF FIRE,
EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on
technical data plate.
14. DOOR OPENING
Warning!
MAXIMUM ANGLE OF DOOR OPENING = 120°
For correct working of the torsion bar and to avoid any break
of the door or of the hinge do not exceed the maximum angle
of door opening i.e. 120°.
MAX
120°
15. PROLONGED SWITCH OFF
When the unit is kept unused for a long time, please take note of the following procedures:
•
Unplug the unit;
•
Clean and dry the tank well;
•
Leave the cover slightly open to avoid formation of bad odours;
•
Cover the unit with a curtain, place it in a dry room and sheltered from the atmospheric
agents.
