EPTA iarp Cool Emotions EXCITE, Использование и обслуживание

Страница: 25 / 80

-25-
9. MAINTENANCE
OPERATION FREQUENCY
ORDINARY /
EXTRAORDINARY
MAINTENANCE
AUTHORISED
STAFF
Cleaning the outer surface
Based on use Ordinary User
Cleaning the accessible inner parts (do not use tools)
Based on use Ordinary User
Checking the power supply, electrical plugs and/or sockets Six-monthly Ordinary User
Seals intactness check Six-monthly Ordinary User
Check the acceptable condition of warning plates Six-monthly Ordinary User
Fridge system tubing intactness check
Six-monthly Ordinary Technical support
Inspecting the cables and inner power connections
Six-monthly Ordinary Technical support
Replacing the led lights
- Extraordinary Technical support
Replacing the power supply cable
- Extraordinary Technical support
Control panel replacement (electronic control unit)
- Extraordinary Technical support
WARNING! Any work carried out on the appliance by the user strictly requires the power plug being disconnected
from the mains socket.
ATTENTION! Use protective shoes and gloves during maintenance operations.
The equipment manager is obliged to check and comply with the maintenance deadlines in the table indicated
below.
Any other maintenance operation not planned in the previous points should be carried out
by the support centres authorised by our dealers or by qualified staff.
When the unit is kept unused for a long time, please take note of the following procedures:
• Unplug the unit;
• Clean and dry the tank well;
• Leave the cover slightly open to avoid formation of bad odours;
• Cover the unit with a curtain, place it in a dry room and sheltered from the atmospheric agents.
8. PROLONGED SWITCH OFF
10. CLEANING
10.1 OUTER CLEANING
For a good preservation of the cabinet’s body a periodical cleaning is necessary .
EXTERNAL BODY : When necessary, the external body should be cleaned with a cloth and a neutral soap
and water solution.
STAINLESS STEEL SURFACES : Wash with warm water and mild detergent, rinse well and dry with soft cloth.
Avoid scouring pads etc. which will spoil the finish of the stainless steel.
SURFACES IN PLASTIC MATERIAL : Wash with warm water and mild detergent, rinse well and dry with soft
cloth; under no circumstances should alcohol, methylated spirits or solvents be used.
GLASS SURFACES : Only use products specifically designed for glass cleaning; It is not advisable to use
ordinary water which can leave a film of calcium on the surface of the glass.
1
2
3
4
1
4