Modello - Modèle - Model
Modell - Modelo
DELIGHT LITE
DELIGHT PRIME
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
17/68
N° DOC
UM000327
10. POSITIONING
The equipment is fitted with 4 swivel wheels (2
with a brake) for movement and positioning.
It is strictly necessary after positioning
to stabilise the equipment on the
ground.
SWIVEL WHEELS WITH
BRAKE
11. OPENING THE DROP-LEAF
GLASS
To open and close the display compartment, vertically
slide the drop-leaf glass on the rear of the equipment.
Ensure perfect closure as incorrect closure would
have a negative impact on the performance of
the equipment and on the excessive build-up of
ice on the inner walls.
EQUIMPENT OPEN
EQUIPMENT CLOSED
13. ENERGY SAVING TIPS
• Install the appliance in a dry, well-ventilated room away from heat sources (radiator, cooking surface and so on) and
in a position out of direct sunlight.
•
Follow the installation instructions to ensure adequate ventilation. Insufficient ventilation to the back of the appliance
causes an increase in energy consumption and reduces cooling efficiency.
• The internal temperature of the appliance depends on the room temperature, how often the doors are opened and
where the appliance is placed. These factors have to be taken into account when setting the thermostat. Only open
the doors when strictly necessary.
• Let hot food and drink cool down before placing them in the appliance.
•
The positioning of the shelves in the fridge has no effect on energy efficiency.
•
The fridge compartment light system uses a LED light, which at the same time ensures more efficient lighting and
reduced energy consumption.
12. PROLONGED SWITCH OFF
When the unit is kept unused for a long time, please take note of the following procedures:
• Unplug the unit;
• Clean and dry well the tank;
• Leave the covers half open to prevent bad smells forming;
• Cover the unit with a curtain, place it in a dry room and sheltered from the atmospheric agents.
