Cleaning and Transporting the Product
If your product gets dirty or you need to move it some distance, follow the instructions in these sections.
Cleaning the Product
Transporting the Product
Cleaning the Product
To keep your product working at its best, you should clean it several times a year.
Caution:
Do not use a hard brush, benzine, alcohol, or paint thinner to clean the product or you may
damage it. Do not place anything on top of the cover or use the cover as a writing surface, or it could get
permanently scratched. Do not use oil or other lubricants inside the product or let water get inside.
1.
Turn off the product.
2.
Unplug the power cable.
3.
Disconnect any connected cables.
4.
Remove the paper from the rear MP tray.
5.
Clean the rear MP tray using a soft brush.
6.
Clean the outer case with a soft cloth dampened with a mild detergent.
Note:
Close the rear MP tray and output tray when you are not using the product.
Parent topic:
Cleaning and Transporting the Product
Transporting the Product
If you need to ship your product or transport it a long distance, prepare it for transportation as follows.
1.
Turn off the product.
2.
Unplug the power cable.
3.
Disconnect any connected cables.
4.
Remove all the paper from the rear MP tray and cassette.
107
Содержание WorkForce Pro WP-4010
