Maintaining Your Product
29
Maintaining Your Product
Follow the instructions in this chapter to check and clean the print head nozzles,
check ink levels, and replace ink cartridges. If you need to align the print head, see
the online
User’s Guide
.
Checking the Print Head Nozzles
If your printouts are faint or have gaps in them, some of the nozzles in the print
head may be clogged or ink may be running low in one or more of the ink
cartridges. Follow the steps below to check the print head nozzles.
1. Load a few sheets of plain paper in cassette 1.
2. Press
if necessary and select
Setup
.
3. Select
Maintenance
, then
Nozzle Check
.
4. Press
x
.
5. Check the nozzle check pattern that prints to see if there are gaps in the lines.
6. If there are no gaps, the print head is clean. Select
Finish Nozzle Check
.
If there are gaps or the pattern is faint, select
Head Cleaning
. Then press
OK
to clean the print head (see page 30).
Nozzles are clean
Nozzles need cleaning
Содержание WorkForce 840
Страница 63: ...Notices 63 ...
Страница 64: ...CPD 28101 Printed in XXXXXX ...