Item
Settings and Explanation
FolderPassword
Set a password to authenticate the destination folder for the Scan to My Folder
function within 20 ASCII characters.
When importing, this overwrites the password set in [EncFolderPassword]. When
exporting, it is always blank.
FtpPassive
Set the connection mode for the FTP server when
FTP
is selected as the
Type
for the
Scan to My Folder function. Active mode: 0, Passive mode: 1
FtpPort
Set the port number for sending scanned data to the FTP server from 0 to 65535 when
FTP
is selected as the
Type
for the Scan to My Folder function.
EncFolderPassword
When exporting, the parameter set for [FolderPassword] is encrypted, then the value is
encoded by BASE64 and output.
When importing and entering a new password in [FolderPassword], this is ignored.
If [FolderPassword] is blank, this value is used and the password remains as it was
before exporting.
PresetIndex
Set the presets that you want to associate with the user. You can set up to five preset
registration numbers separated by commas.
Related Information
&
“Importing from CSV / ENE File” on page 71
Synchronization with the LDAP Server (Web Config)
Make the LDAP server settings for the printer using Web Config.
Set it when you select
LDAP
or
Local DB and LDAP
for
Authentication Method
.
For details of setting items, see the same item for Epson Device Admin in this manual.
Related Information
&
“LDAP Server Setting Items” on page 68
&
“Kerberos Setting Items” on page 70
&
“Search Setting Items” on page 70
Setup & Administration Guide
Information Registration and System Configuration
44