Kerberos Setting Items
Select
Network
>
Security
>
Kerberos Settings
.
Item
Settings and Explanation
Realm (Domain)
Enter the realm of the Kerberos authentication in 1024 characters or less in ASCII.
If you do not register this, leave it blank.
KDC Address
Enter the address of the Kerberos authentication server. Enter 1024 characters or
less in either IPv4, IPv6 or FQDN format. If you do not register this, leave it blank.
Port Number (Kerberos)
Enter the Kerberos server port number between 1 and 65535.
Search Setting Items
Set the search attribute of the users to synchronize with the LDAP server authentication.
Search Setting
Item
Settings and Explanation
Search Base (Distinguished Name)
Specify the start position for searching the user information when you search it
from the LDAP server. Enter between 0 and 128 characters in Unicode (UTF-8). If
you do not search for arbitrary attribute, leave this blank.
Example for the local server directory: dc=server,dc=local
User ID Attribute
Specify the attribute name to display when searching for the user ID. Enter
between 1 and 255 characters in ASCII. The first character should be a-z or A-Z.
Example: cn, uid
User name Display Attribute
Specify the attribute name to display as the user name. Enter between 0 and 255
characters in ASCII. The first character should be a-z or A-Z. You can leave this
blank.
Example: cn, name
Setup & Administration Guide
Information Registration and System Configuration
70
