Epson TM-U200P, Информационное руководство

Страница: 52 / 55

Rev. A Application 2-1
TM–U200/200P Information Manual
Chapter 2
Application
Receipt Issuing
This section presents examples illustrating the functioning of the ESC/POS commands and an actual
print sample.
Procedure for Receipt Issuing Using the TM-U200B
Procedure Commands used Description
1. Stamp printing ESC 3 , ESC a , ESC t , ESC !,
ESC U , ESC 2 , LF , CR
Specifies a print position to the center by using the ESC a
command. Changes the character code table by using
the
ESC t command, and prints a stamp date in the center
of the paper roll in the unidirection. Adjusts line spacing for
a line data being continuous.
2. Print date and time
ESC a , ESC d
Specifies a print position to the left by using the ESC a
command after printing the date and time in the center of
the paper roll.
3. Print Item A
ESC t , ESC ! , LF
Selects the character code table page 1 by using the
ESC t command, the 7 x 9 font by using the ESC !
command, and prints the Item A.
4. Print Item B ESC ! , ESC U , LF Specifies double-height by using the ESC ! command, and
prints “TOTAL” in the unidirection. Cancels the double-
height and prints in the bidirectional mode for other lines.
5. Cut paper GS V Feeds the paper to the cutting position and executes
cutting.