Epson SureColor SC-S80600, Быстрый старт

Страница: 3 / 9

Epson SC-S80600 - GMG Quick Start Guide page 3
1 Introduction
1.1
Substrate Proofing
To close the gap between traditional proofing and mockup creation, Epson SC-S80600 driven by GMG ColorProof and
GMG OpenColor is used to create color accurate and reproducible prints.
Epson SC-S80600 allows proofing to be extended to production substrates or substrates that come very close to the look
and feel of the final production.
GMG OpenColor allows a fast and easy characterization of the simulated color space based on spectral color information.
To allow the use of virtually any substrate, GMG ColorProof offers you the Calibration Creation Wizard. This enables the
creation of a custom calibration set and a corresponding output condition for GMG OpenColor.
Required chargeable licenses
GMG ColorProof System
-
Product GMG ColorProof 5.10 (possibly with DotProof 5.10 Option / FlexoProof 5.10)
-
Option Epson SC-S80600
-
Option GMG OpenColor Output License
GMG OpenColor System
-
Product GMG OpenColor Profiler Standard 2.1 (or GMG OpenColor Profiler Plus Edition 2.1)
-
Option GMG OpenColor Offset (or Option GMG OpenColor Flexo / Option GMG OpenColor Gravure)
-
Option GMG OpenColor Profiling for Epson SC-S80600 (included in Option Epson SC-S80600
purchase)
Additional Documents
-
General information can be found on the manufacturer’s website
-
Official Epson SC-S80600 Datasheet
-
Epson SC-S80600 Series Online Manual
1.2
Quick Steps
1 Install GMG ColorProof and GMG OpenColor and make sure that you have the required licenses.
See
Required chargeable licenses .
2 Make sure your printer is ready and connected to a network via TCP/IP.
3 Download and setup the Epson Control Dashboard.
See
Epson Control Dashboard .
4 Load and setup media on the printer and Epson Control Dashboard.
See
Media Setup .
5 Create and setup a new printer and media in GMG ColorProof.
See
Printer and Media Setup in GMG ColorProof .
6 Make sure that GMG ColorProof and GMG OpenColor are running and connected.
7 Use Calibration Creation Wizard to create a custom calibration set and an output condition for GMG OpenColor.
See
Calibration Creation Wizard .
8 Use GMG OpenColor to create multicolor proof profiles.
See
Profiling with GMG OpenColor .