Epson SureColor S30670, Руководство пользователя

Страница: 95 / 193

Basic Operations 95
1. Use the
d
/
u
buttons to select Feed Adjustment and press the
Z
button.
2. Select Auto and press the
Z
button.
3. Press the
Z
button to print a test pattern and perform auto feed adjustment.
Platen Gap
Adjust the platen gap (the gap between the print head and the media) if print results are
smudged.
1. Use the
d
/
u
buttons to select Platen Gap and press the
Z
button.
2. Use the
d
/
u
buttons to select the desired setting and press the
Z
button.
3. Press the
y
button to return to the customize settings menu.
Note:
Feed Adjustment
varies with the media used. Load the media for which feed adjustment is
required under the same conditions as the actual print job. For example, if you are using the auto
take-up reel unit for printing, the auto take-up reel unit should also be used for feed adjustment.
Furthermore the media must be loaded and feed adjustment performed again after the heavy roll
media system is installed even if feed adjustment has already been performed using standard roll
media system.
Feed adjustment is not available under the following conditions:
❏
The media is transparent or colored.
❏
The printer is exposed to direct sunlight or interference from other ambient light sources.
Shade the printer from sources of interference.
❏
2.5 is selected for Platen Gap in the setup menu.
Choose another option for Platen Gap .
Auto feed adjustment may also fail to produce the expected results if the nozzles are clogged.
Perform head cleaning to remove any clogs.
Important:
Select 2.5 only if print results are still smudged when 2.0 is selected. Choosing a larger gap than
required may result in ink stains inside the printer, reduced print quality, or shorter product life.