Epson SureColor F6200 Скачать руководство пользователя страница 103 | Manualshive

Страница: 103 / 112

background image

For Canadian Users

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference, in which
case the user may be required to take adequate measures.

Parent topic:

Notices

Software License Terms

Bonjour

This printer product includes the open source software programs which apply the Apple Public Source
License Version1.2 or its latest version ("Bonjour Programs").

We provide the source code of the Bonjour Programs pursuant to the Apple Public Source License
Version1.2 or its latest version until five (5) years after the discontinuation of same model of this printer
product. If you desire to receive the source code of the Bonjour Programs, contact Epson support.

You can redistribute Bonjour Programs and/or modify it under the terms of the Apple Public Source
License Version1.2 or its latest version.

These Bonjour Programs are WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

The Apple Public Source License Version1.2 is as follows. You also can see the Apple Public Source
License Version1.2 at http://www.opensource.apple.com/apsl/.

APPLE PUBLIC SOURCE LICENSE

Version 2.0 - August 6, 2003

1. General; Definitions. This License applies to any program or other work which Apple Computer, Inc.
("Apple") makes publicly available and which contains a notice placed by Apple identifying such program
or work as "Original Code" and stating that it is subject to the terms of this Apple Public Source License
version 2.0 ("License"). As used in this License:

1.1 "Applicable Patent Rights" mean:(a) in the case where Apple is the grantor of rights, (I) claims of
patents that are now or hereafter acquired, owned by or assigned to Apple and (ii) that cover subject
matter contained in the Original Code, but only to the extent necessary to use, reproduce and/or
distribute the Original Code without infringement; and (b) in the case where You are the grantor of rights,
(I) claims of patents that are now or hereafter acquired, owned by or assigned to You and (ii) that cover
subject matter in Your Modifications, taken alone or in combination with Original Code.

103

«
...
101
102
103
104
105
...
»

Содержание SureColor F6200

















































































































Отзывы:

Нет отзывов

Похожие инструкции для SureColor F6200

Бренд: Oki Страницы: 282

Бренд: MakerPi Страницы: 21

Бренд: SA Страницы: 5

IMAGEPRESS C7010VPS

Бренд: Canon Страницы: 4

iP2600 - PIXMA Color Inkjet Printer

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 8

ImageCLASS 2300

Бренд: Canon Страницы: 102

ImageCLASS MF4570dw

Бренд: Canon Страницы: 164

imagePRESS C800 Series

Бренд: Canon Страницы: 132

ImageCLASS MF5730

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 12

imagePROGRAF iPF8300S

Бренд: Canon Страницы: 52

Бренд: Canon Страницы: 2

Бренд: GCC Technologies Страницы: 14

Бренд: NCR Страницы: 2

Perfecta 3600STP

Бренд: Variquest Страницы: 12

Perfecta 3600STP

Бренд: Variquest Страницы: 231

Awards Maker 400

Бренд: Variquest Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды