Epson Stylus Pro 5000, Руководство по обслуживанию, Страница: 28 / 780

EPSON Stylus Pro 5000 Chapter1 Product Description
Rev.A
1-16
PANEL SETTING FUNCTION
Here explains input method for each panel setting.
„
Printing nozzle check pattern and printer configuration
•
Operation: Reset SW + Power On
•
Exit: Power Off
•
Function: (Power LED blinking while in this mode)
1)Reset SW + Power on
→
2)Position change
to thick
→
3)Starts printing pattern
→
4)Printing 1-page
→
5)Eject paper
→
6) Stand by
mode in self-test by pressing
→
Refer to
followings.
[Pressing Cleaning SW: in standby mode only]
1)Execute cleaning
→
2)Eject paper 3)Reprint self test
page
→
4)self-test stand by mode.
[Pressing Eject SW: in standby mode only]
1)Feed paper
→
2)Reprint self test page
→
3)self-test
stand by mode.
Note) Ignore Cleaning SW while printing and Power off to exit this mode.
CHECK POINT
9
„ „
Even if Cleaning or Eject switch is pressed
during printing, the panel operation is ignored.
„ „
You can escape from the self-test mode only by
turning the power off.
Printing Pattern: Print nozzle test pattern, firmware version, the value
of wasted ink count and current setting values are
printed. Following shows printing pattern.
K 0 0 2 2 7 A A : 0 D 9 5 B : 0 D A F D : 0 0 2 C E 2 C 0
C u r r e n t S e t t i n g s
P a p e r S i z e / T y p e C h e c k : O n
P a r a l l e l I / F E C P M o d e : O f f
P l a t e n G a p A d j u s t m e n t f o r M a n u a l F e e d S l o t s : F i x e d ( t h i c k p a p e r )
Figure 1-3. Printing Sample
[Explanation]
K00227A:
Firmware version.
A:0D95 : The present counting value of ink absorber only for
dark colors head.