Epson Stylus Photo 875 DC, Руководство пользователя

Страница: 43 / 212

Paper Handling
1-25
Note:
Do not select Auto Sheet Feeder as the Paper Source setting in
the printer driver. Doing so will cause unnecessary paper to be fed
after each print job. If you accidentally select
Auto Sheet Feeder ,
cut the paper off at the back of the printer before it feeds into the sheet
feeder, then turn the printer power off and back on again.
4. Make the Roll Paper Option settings at the bottom of the
dialog box.
Paper size
Page Size
Select a predefined paper or page size from the list
or define a custom size.
If you select a predefined paper or page size, when
the data exceeds the selected size, it will be printed
in individual pages on the roll paper. A 36-mm margin
will be printed between each page of data in a print
job. When you press the
E
load/eject button.
Define a custom size by selecting User Defined in the
list. This will open the User Defined paper or page size
dialog box where you can specify the length and
width of your document. As long as your paper or
page size is large enough, the data will be printed as
one page. This will allow continuous printing of the
data without page breaks.
Banner Mode Select this mode when you wish to print multi-
page data as continuous data on the roll
paper, rather than as individual pages. When
this check box is selected, the Save roll paper
check box is enabled.