Epson Stylus Photo 790, Руководство по установке

Страница: 11 / 16

c
Caution:
❏
You must remove the yellow tape seals from the cartridges
before installing them; otherwise, the cartridges will become
unusable and you will be unable to print.
❏
If you have installed an ink cartridge without removing the
yellow tape seal, you must remove the cartridge and install a
new one. Prepare the new cartridge by removing the yellow tape
seal, then install it in the printer.
❏
Do not remove the blue portion of the tape seal from the
cartridges; otherwise, the cartridges may become unusable.
❏
Do not remove the tape seals from the bottom of the cartridges;
otherwise, ink will leak.
❏
Do not touch the green IC chip on the side
of the cartridge. Doing so may prevent
normal operation and printing.
❏
Do not remove the green IC chip from the
side of the cartridge. If you install an ink
cartridge without a chip, the printer may
be damaged.
5. Align the tabs on each ink cartridge so that they
are resting on the tabs protruding from the base
of the opened ink cartridge clamps. Do not apply
excessive force to the cartridges.
c
Caution:
Make sure that the ink cartridge tabs are not
under the tabs protruding from the base of the
opened ink cartridge clamps, as this can damage
the clamps.
Note:
Install both ink cartridges. If either of the cartridges is not installed, the
printer will not work.
6. Lower the ink cartridge clamps until they lock into place.
7. Press the
e
ink cartridge replacement button. The printer moves the
print head and begins charging the ink delivery system. This process
takes about two and a half minutes.
Do not touch this part.