Epson Stylus Color 670, Руководство по обслуживанию

Страница: 24 / 152

EPSON Stylus Color 670 Revision A
Product Description Operator Controls 24
1.4.7 Errors
o
Ink End
When the printer runs out the most parts of the ink of any one color, it
warns ink-low and keeps printing. When the printer runs out the
whole ink of any one color, it stops printing and indicates ink-out
error. User is requested to install a new ink-cartridge in this state. A
ink-cartridge once taken out should never be used again. Re-
installation of the cartridge not filled fully upsets the ink level
detection and may cause a serious problem in the printhead as a
result.
o
Paper Out
When the printer fails to load a sheet, it goes paper out error.
o
Paper Jam
When the printer fails to eject a sheet, it goes paper jam error.
o
No Ink Cartridge
When the printer detects ink-cartridge is not installed or off, it goes
this error mode.
o
Maintenance request
When the total quantity of ink wasted through the cleaning and
flushing is reaches to the limit, printer indicates this error and stops.
The absorber in the printer enclosure is needed to be replaced with a
new one by a service person.
o
Fatal Errors
Carriage control error or CG access error.
1.4.8 Paper Handling
Do not perform reverse feed more than 9.5mm (0.38”).
1.4.9 Paper Specification
o
Cut Sheet
n
Size:
A4 (210 x 297 mm)(8.3 x 11.7”)
Letter (216 x 279 mm)(8.5 x 11.0”)
B5 (182 x 257 mm)(7.2 x 10.1”)
Legal (216 x 356 mm)(8.5 x 14.0”)
Statement (139.7 x 215.9mm)(5.5 x 8.5”)
Executive (184.2 x 266.7 mm)(7.25 x 10.5”)
A5 (148 x 210 mm)
A6 (105 x 148 mm)
n
Thickness:
0.08mm to 0.11mm(0.003 to 0.004”)
n
Weight:
64g/m
2 to 90g/m 2 (17lb to 24lb / 55 to 78 kg)
n
Paper quality:
exclusive paper, bond paper, PPC
o
Transparency, Glossy paper
n
Size:
A4 (210 x 297 mm)(8.3 x 11.7”)
Letter (216 x 279 mm)(216 x 279 mm)(8.5 x 11.0”)
n
Thickness:
0.075mm to 0.085mm(0.003 to 0.0033”)
NOTE: Transparency printing is only available at normal
temperature.