Epson SC-T3000, Руководство по обслуживанию

Страница: 30 / 314

SC-T7000 series/SC-T5000 series/SC-T3000 series Revision B
PRODUCT DESCRIPTION Control Panel Specifications 30
Confidential
Paper menu
Custom Paper
Setting
XXXXXXXXXXX
(name of custom
paper type)
Remove Skew
On
Select whether to enable (“On”) or disable (“Off”) paper skew reduction.
Off
Setting Name
Enter a name of up to 22 characters for custom paper settings. Choose an easy-to-remember name for quick
selection.
Restore Settings
Yes
Restore the selected custom paper settings to default values.
No
Print Paper List Press the [OK] button to print a list of custom paper settings.
Maintenance menu
Nozzle Check
Press the [OK] button to print a nozzle check pattern. Visually inspect the printed pattern and perform head
cleaning if you notice faint or missing areas.
Head Cleaning
Inspect the printed pattern and select the check boxes for patterns with faint or missing areas. To select all
nozzles, place a check in the box on the left.
Head Alignment
Auto(Uni-D)
If print results are grainy or out of focus, perform head alignment to realign the print head. If “Auto” is
selected, the printer will scan the printed pattern during printing and realign the head automatically.
If “Manual” is selected, a pattern will be printed; inspect the pattern visually and enter the value you think
appropriate.
Auto(Bi-D)
Manual(Uni-D)
Manual(Bi-D)
Cutter Maintenance
Adjust Cut Position -3 to 3 mm
You can fine tune the cut position when printing to roll paper with no margins in all
directions. The cut position can be adjusted in increments of 0.2 mm.
Replace Cutter
Moves the cutter to the replacement position so it can be replaced. Press the [OK] button to move the cutter
to the replacement position. The paper must be removed before replacing the cutter.
Setup menu Printer Setup Roll Paper Setup
Auto Cut
On Choose “On” to automatically cut roll paper using the built-in cutter as each page is
printed, “Off” to disable auto paper cutting. The setting selected with the printer
driver takes priority when the printer driver is used.
Off
Refresh Margin
On If “On” is selected during borderless printing, the printer will automatically trim the
leading edge to remove any ink stains that may have been left by the previous copy;
to disable this feature, choose “Off”.
Off
Page Line
On If “Auto Cut” is “Off”, you can choose to print (“On”) or not print (“Off”) cut lines
on roll paper. Cut lines are not printed if “Auto Cut” is “On” or when cut sheets or
poster board is used.
Note, however, that if the roll width selected with the computer is narrower than the
paper loaded in the printer, cut lines will be printed regardless of the option selected
for “Auto Cut”.
The setting selected with the printer driver takes priority when the printer driver is
used.
Off
Table 1-8. Menu List
Menu Menu Item / Setting Value (Shaded one is the default) Explanation