Epson SC-R5000 Series Скачать руководство пользователя страница 52

Страница: 52 / 148

Hold the center of the media with one hand,
and pull it straight out until the leading edge of
the media enters the entrance of the curing
heater.

Important:

If the leading edge of the media is wavy or
deformed by the heat, pull it all the way out
of the front of the pressure rollers. If the
pressure rollers press down on wavy or
deformed areas, printing will not be
performed correctly.

Do not pull the media with both hands. This
could cause the media to skew or move around.

Tap lightly on both ends of the media, and
check if there is a difference in tension between
the left and right sides.

If there is a difference in tension, the media
becomes loose.

From the front of the printer, move the media
loading lever to the back, and correct any
looseness in the media.

Once the looseness is corrected, move the
media loading lever to the front.

SC-R5000 Series/SC-R5000L Series User's Guide

Basic Operations

Содержание SC-R5000 Series





















































































































































Результаты поиска

Содержание SC-R5000 Series

Отзывы:

Похожие инструкции для SC-R5000 Series

Бренды по названию

Популярные бренды

Epson SC-R5000 Series, Руководство пользователя

Результаты поиска

Содержание SC-R5000 Series

Отзывы:

Похожие инструкции для SC-R5000 Series

Бренды по названию

Популярные бренды