Epson SC-P10000 SERIES, Руководство пользователя

Страница: 23 / 217

❏
Ink cartridges that have been stored at low
temperatures for an extended period should be
allowed to return to room temperature over a
period of four hours.
❏
Do not touch the IC chips on the ink cartridges.
You may not be able to print properly.
❏
Install all ink cartridges into each slot. You cannot
print if any of the slots are empty.
❏
Do not leave the printer without ink cartridges
installed. The ink in the printer may dry,
preventing it from printing as expected. Leave ink
cartridges in all slots even while you do not use
the printer.
❏
The ink level and other data are stored in the IC
chip, allowing cartridges to be used after being
removed and replaced.
❏
To avoid getting dirt on the ink supply port, store
the removed ink cartridge properly. The ink
supply port has a valve in it so it does not need to
be capped.
❏
Removed ink cartridges may have ink around the
ink supply port, so be careful not to get any ink
on the surrounding area when removing the
cartridges.
❏
To maintain the quality of the print head, this
printer stops printing before ink cartridges are
completely expended.
❏
Although the ink cartridges may contain recycled
materials, this does not affect printer function or
performance.
❏
Do not dismantle or remodel ink cartridges. You
may not be able to print properly.
❏
Do not drop or knock ink cartridges against hard
objects; otherwise, the ink may leak.
Notes on handling paper
Note the following points when handling and storing
the paper. If the paper is not in good condition, print
quality may decline.
Check the documentation supplied with each paper.
Notes on Handling
❏
Use Epson special media under normal room
conditions (temperature: 15 to 25°C, humidity: 40
to 60%).
❏
Do not fold the paper or scratch the surface of the
paper.
❏
Avoid touching the printable surface of the paper
with your bare hands. Moisture and oils from
your hands can affect print quality.
❏
Handle paper by the edges. We recommend
wearing cotton gloves.
❏
Changes in temperature and humidity may cause
paper to become wavy or curled. Check the
following points.
❏
Load the paper just before printing.
❏
Do not use wavy or curled paper.
For roll paper, cut off the wavy or curled
parts and then load it again.
For cut sheets, use new paper.
❏
Do not wet the paper.
❏
Do not throw away the paper packaging as you
can use it for storing the paper.
❏
Avoid locations that are subject to direct sunlight,
excessive heat, or humidity.
❏
Keep cut sheets in their original package after
opening, and keep them in a flat place.
❏
Remove roll paper that is not in use from the
printer. Rewind it correctly and then store it in
the original packaging that came with the roll
paper. If you leave the roll paper in the printer for
a long time, its quality may decline.
Notes on handling printed paper
To maintain long lasting, high quality print results,
note the following points.
❏
Do not rub or scratch the printed surface. If they
are rubbed or scratched, the ink may peel off.
❏
Do not touch the printed surface; Failure to
observe this precaution may cause ink to rub off.
SC-P20000 Series/SC-P10000 Series User's Guide
Introduction
23