Technical Description
S5U13517P00C100 Evaluation Board
Seiko Epson Corporation
11
Rev. 1.1
4.2 Clocks
The clock for the S1D13517 Display Controller is provided by a 24MHz oscillator.
The S5U13517P00C100 evaluation board has a DIP14 footprint for an optional second oscillator, Y2. This is
provided for cases requiring a different clock frequency for the S1D13517 Display Controller. To use Y2, an oscil-
lator must be populated in the Y2 footprint and the J6 jumper placed at position 3-4.
4.3 Reset
The S1D13517 Display Controller on the S5U13517P00C100 evaluation board can be reset using a push-button
(SW2), or via an active low reset signal from the host development platform (pin 33 on the CN1 connector).
Figure 4-1: Second oscillator and Reset switch Location (Y2, SW2)
Y2
SW2
