Epson S1C88 Series, Руководство пользователя

Страница: 328 / 353

Locator lc88 (1)
Main Tool Chain
Options
Error Messages
-M Produce a locate map file ( .map )
-S space Generate specific space
-V Display version header only
-d file Read description file information from file, '-' means
stdin
-e Clean up if erroneous result
-err Redirect error messages (
.elc
)
-f
file
Read command line information from
file, '-' means
stdin
-f format Specify output format
-o
filename
Specify name of output file
-p Make a proposal for a software part on
stdout
-v Verbose option. Print name of each file as it is processed
-w n Suppress messages above warning level n
Startup Command
lC88 [ option]...[file]...
Warnings (W)
W 100: Maximum buffer size for For the given format, a maximum buffer size is defined.
name is size (Adjusted)
W 101: Cannot create map file The given file could not be created.
filename, turned off -M option
W 102: Only one -g switch allowed, Only one .out file can be debugged.
ignored -g before name
W 104: Found a negative length Only stack sections can have a negative length.
for section name, made it
positive
W 107: Inserted ' name' keyword A missing keyword in the description file was inserted.
at line
line
W 108: Object name ( name) Internal name of object file not the same as the filename.
differs from filename
W 110: Redefinition of system Usually only one load module will access the system table
start point (__lc_pm).
W 111: Two -o options, output Second -o option, the message gives the effective name.
name will be
name
W 112: Copy table not referenced, If you use a copy statement in the layout part, the initial
initial data is not copied data is located in rom.
W 113: No .out files found to locate No files where specified at the invocation.
W 114: Cannot find start label
label No start point found.
W 116: Redefinition of name at line Identifier was defined twice.
line
W 119: File filename not found in All files to be located must be given as an argument.
the argument list
W 120: unrecognized name option Wrong option assignment. Check the manual for
<
name> at line line
possibilities.
(inserted ' name')
W 121: Ignored illegal sub-option An illegal format sub option was detected.
' name' for name
W 122: Illegal option:
option
An illegal option was detected.
(-H or -\? for help)
W 123: Inserted
character at line
The given character was missing in the description file.
line
W 124: Attribute
attribute at line
An unknown attribute was specified in the description file.
line unknown
W 125: Copy table not referenced, Sections with attribute blank are detected, but the copy
blank sections are not table is not referenced. The locator generates info for the
cleared startup module in the copy table for clearing blank sections
at startup.