Epson S1C88 Series, Руководство пользователя

Страница: 291 / 353

APPENDIX C ASSEMBLY TOOL REFERENCE <asm88>
S5U1C88000C MANUAL II
EPSON
279
WORKBENCH/DEV TOOLS/OLD ASSEMBLER
ERROR MESSAGE
• Fatal errors
can't create <file>
can't open <file>
can't read tmp file
can't write tmp file
namelist full
no i/p file
insufficient memory
can't seek on vmem file
can't seek to end of vmem file
no swappable page
read error on vmem file
write error on vmem file
<file> cannot be created.
<file> cannot be opened.
Temporary file cannot be read.
Temporary file cannot be written.
Name list table is full.
There is no input file specification.
There is not enough memory.
Seeking of virtual memory file has failed.
Cannot reach the end of virtual memory file.
There is no swap space.
Reading of virtual memory file has failed.
Writing to virtual memory file has failed.
Error message Description
• Severe errors
<numeric label> already defined
<identifier> wrong type
<token> expected
' missing
attempted division by zero
attempt to redefine <identifier>
constant expected
end expected
encountered too early end of line
field overflow
invalid branch address
invalid byte relocation
invalid character
invalid flag
invalid operand
invalid relocation item
invalid register
invalid register pair
invalid symbol define
invalid word relocation
new origin incompatible with current psect
non terminated string
<identifier> not defined
missing numeric expression
cars or jrs out of range
carl or jrl out of range
operand expected
psect name required
phase error <identifier>
CODE or DATA missing
ROM capacity overflow
RAM capacity overflow
relocation error in expression
<identifier> reserved word
syntax error <token> expected
syntax error <token> unexpected
syntax error - invalid identifier <identifier>
syntax error <token> invalid in expression
system error < > <token>
unsupported instruction
unsupported operand
The numeric label has been defined previously.
An illegal identifier has appeared.
A token is needed.
A quotation mark is missing.
Attempt has been made to divide by zero.
Attempt has been made to redefine an identifier.
A constant expression is required.
There is no end instruction.
The line has terminated in the middle.
The field to be secured has overflowed.
An external defined symbol is used for the operand of the short branch instruction.
The byte relocation is invalid.
Three is an illegal character.
The flag is invalid.
The operand is invalid.
The relocation item is invalid.
The register is invalid.
The register combination is invalid.
The symbol definition is invalid.
The word relocation is invalid.
There is an absolute origin within the relocatable section (relocatable mode).
The termination of a string cannot be located.
Undefined identifier has appeared.
A numeric expression is missing.
Branch destination by cars or jrs is out of range.
Branch destination by carl or jrl is out of range.
There is no operand.
A section name must be specified.
The label address is different between pass 1 and pass 2.
There is no section setting pseudo-instruction.
ROM capacity has overflowed.
RAM capacity has overflowed.
A relocation error has appeared within the expression.
<identifier> is a reserved word.
Syntax error due to insufficient token(s)
Syntax error due to excess token(s)
Syntax error due to an illegal identifier
Syntax error due to an illegal token
System error due to an illegal token
Unsupported instruction has appeared.
Unsupported operand has appeared.
Error message Description