manualshive.com logo in svg

Epson S1C33210, Техническое руководство

Технический мануал для Epson S1C33210 доступен для бесплатного скачивания на manualshive.com. Пользователи могут легко загрузить этот мануал для получения дополнительной информации о продукте. Будьте в курсе всех особенностей и возможностей этого устройства, прочитав технический мануал.

Поделиться
Скачать
background image

II CORE BLOCK: BCU (Bus Control Unit)

S1C33210 FUNCTION PART

EPSON

B-II-4-37

A18SZ:Areas 18–17 device size selection (DE) / Areas 18–15 set-up register (0x48120)
A16SZ:Areas 16–15 device size selection (D6) / Areas 18–15 set-up register (0x48120)
A14SZ:Areas 14–13 device size selection (D6) / Areas 14–13 set-up register (0x48122)
A12SZ:Areas 12–11 device size selection (D6) / Areas 12–11 set-up register (0x48124)
A10SZ:Areas 10–9 device size selection (D6) / Areas 10–9 set-up register (0x48126)
A8SZ: Areas 8–7 device size selection (D6) / Areas 8–7 set-up register (0x48128)
A5SZ: Areas 5–4 device size selection (D6) / Areas 6–4 set-up register (0x4812A)

Select the size of the device connected to each area.

Write "1": 8 bits
Write "0": 16 bits

Read: Valid

A device size can be selected for every two areas.
An 8-bit size is selected by writing "1" to AxxSZ and a 16-bit size is selected by writing "0" to AxxSZ.
Area 6 has its first half (0x300000 through 0x37FFFF) fixed to an 8-bit device and the last half (0x380000 through
0x3FFFFF) fixed to a 16-bit device.
At cold start, these bits are set to "0" (16 bits). At hot start, these bits retain their status before being initialized.

A18DF1–A18DF0:

Areas 18–17 output disable delay time (D[D:C]) / Areas 18–15 set-up register (0x48120)

A16DF1–A16DF0:

Areas 16–15 output disable delay time (D[5:4]) / Areas 18–15 set-up register (0x48120)

A14DF1–A14DF0:

Areas 14–13 output disable delay time (D[5:4]) / Areas 14–13 set-up register (0x48122)

A12DF1–A12DF0:

Areas 12–11 output disable delay time (D[5:4]) / Areas 12–11 set-up register (0x48124)

A10DF1–A10DF0:

Areas 10–9 output disable delay time (D[5:4]) / Areas 10–9 set-up register (0x48126)

A8DF1–A8DF0:

Areas 8–7 output disable delay time (D[5:4]) / Areas 8–7 set-up register (0x48128)

A6DF1–A6DF0:

Area 6 output disable delay time (D[D:C]) / Areas 6–4 set-up register (0x4812A)

A5DF1–A5DF0:

Areas 5–4 output disable delay time (D[5:4]) / Areas 6–4 set-up register (0x4812A)

Set the output-disable delay time.

Table 4.22  Output Disable Delay Time

AxxDF1

AxxDF0

Delay time

1

1

3.5 cycles

1

0

2.5 cycles

0

1

1.5 cycles

0

0

0.5 cycles

When using a device that has a long output-disable time, set a delay time to ensure that no contention for the data bus
occurs during the bus operation immediately after a device is read.
At cold start, these bits are set to "11" (3.5 cycles). At hot start, the bits retain their status before being initialized.

A18WT2–A18WT0: Areas 18–17 wait control (D[A:8]) / Areas 18–15 set-up register (0x48120)
A16WT2–A16WT0: Areas 16–15 wait control (D[2:0]) / Areas 18–15 set-up register (0x48120)
A14WT2–A14WT0: Areas 14–13 wait control (D[2:0]) / Areas 14–13 set-up register (0x48122)
A12WT2–A12WT0: Areas 12–11 wait control (D[2:0]) / Areas 12–11 set-up register (0x48124)
A10WT2–A10WT0: Areas 10–9 wait control (D[2:0]) / Areas 10–9 set-up register (0x48126)
A8WT2–A8WT0:

Areas 8–7 wait control (D[2:0]) / Areas 8–7 set-up register (0x48128)

A6WT2–A6WT0:

Area 6 wait control (D[A:8]) / Areas 6–4 set-up register (0x4812A)

A5WT2–A5WT0:

Areas 5–4 wait control (D[2:0]) / Areas 6–4 set-up register (0x4812A)

Set the number of wait cycles to be inserted when accessing an SRAM device.
The values 0 through 7 written to the control bits equal the number of wait cycles inserted.
Note that the write cycle consists of a minimum of two cycles, so that a writing 0 or 1 is invalid.
When an SRAM device is connected, wait cycles derived via the #WAIT pin can also be inserted. In this case too, the
wait cycles set by AxxWT are valid.
The DRAM read/write cycles do not have wait cycles inserted that are set by AxxWT or derived from the #WAIT
pin.
The burst read cycle of a burst ROM (except for the first access) also does not have any wait cycle inserted. The first
read cycle of a burst ROM and the write cycle to the burst ROM area have wait cycles inserted that are set by
AxxWT . Wait cycles derived from the #WAIT pin also can be inserted in the cycle for writing to the burst ROM area.

Содержание S1C33210
















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для S1C33210

Alacritech 1000x1 Hardware Installation Manual preview
1000x1
Бренд: Alacritech Страницы: 20
Belkin F5D9001 Series Manual preview
F5D9001 Series
Бренд: Belkin Страницы: 72
SUNRICH TECHNOLOGY C-330 User Manual preview
C-330
Бренд: SUNRICH TECHNOLOGY Страницы: 5
ROE EVISON HD101 User Manual preview
EVISON HD101
Бренд: ROE Страницы: 41
8e6 Technologies ER3-100 (5K02-55) Quick Start Manual preview
ER3-100 (5K02-55)
Бренд: 8e6 Technologies Страницы: 74
Neo Instruments Mini Vent User Manual preview
Mini Vent
Бренд: Neo Instruments Страницы: 2
Tandy 26-3814 Operation Manual preview
26-3814
Бренд: Tandy Страницы: 24
C&T Solution VCO-6131E-4M2 User Manual preview
VCO-6131E-4M2
Бренд: C&T Solution Страницы: 129
Cypress Semiconductor CY7C68033 Specification Sheet preview
CY7C68033
Бренд: Cypress Semiconductor Страницы: 33
ivideon Bridge B1610 Quick Start Manual preview
Bridge B1610
Бренд: ivideon Страницы: 11
Xantech IR-X10 Installation Instructions Manual preview
IR-X10
Бренд: Xantech Страницы: 16
DFRobot FIT0677 Assembly Manual preview
FIT0677
Бренд: DFRobot Страницы: 30
AXIOMTEK UST510-52B-FL Series User Manual preview
UST510-52B-FL Series
Бренд: AXIOMTEK Страницы: 77
MCT MPU100ZW User Manual preview
MPU100ZW
Бренд: MCT Страницы: 12
C&H Technologies EM405D100 Specification Sheet preview
EM405D100
Бренд: C&H Technologies Страницы: 2
ICP DAS USA VXC-114U Series Quick Start Manual For preview
VXC-114U Series
Бренд: ICP DAS USA Страницы: 8
XMOS XK-XMP-64 Hardware Manual preview
XK-XMP-64
Бренд: XMOS Страницы: 10
Jatontec JT4500H Quick User Manual preview
JT4500H
Бренд: Jatontec Страницы: 13

Бренды по названию

Популярные бренды

Загрузить еще бренды