NOTICE
：
PLEASE READ CAREFULLY BELOW BEFORE THE USE OF THIS DOCUMENT ©Seiko Epson Corporation 2020
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
1. The content of this document is subject to change without notice. Before purchasing or using Epson products, please contact with
sales representative of Seiko Epson Corporation (“Epson”) for the latest information and be always sure to check the latest information
published on Epson’s official web sites and resources.
2. This document may not be copied, reproduced, or used for any other purposes, in whole or in part, without Epson’s prior consent.
3. Information provided in this document including, but not limited to application circuits, programs and usage, is for reference purpose
only. Epson makes no guarantees against any infringements or damages to any third parties’ intellectual property rights or any other
rights resulting from the information. This document does not grant you any licenses, any intellectual property rights or any other rights
with respect to Epson products owned by Epson or any third parties.
4. Using Epson products, you shall be responsible for safe design in your products; that is, your hardware, software, and/or systems shall
be designed enough to prevent any critical harm or damages to life, health or property, even if any malfunction or failure might be
caused by Epson products. In designing your products with Epson products, please be sure to check and comply with the latest
information regarding Epson products (including, but not limited to this document, specifications, data sheets, manuals, and
Epson’s
web site). Using technical contents such as product data, graphic and chart, and technical information, including programs,
algorithms and application circuit examples under this document, you shall evaluate your products thoroughly both in stand-alone
basis and within your overall
systems. You shall be solely responsible for deciding whether to adopt/use Epson products with your
products.
5. Epson has prepared this document carefully to be accurate and dependable, but Epson does not guarantee that the information is
always accurate and complete. Epson assumes no responsibility for any damages you incurred due to any misinformation in this
document.
6. No dismantling, analysis, reverse engineering, modification, alteration, adaptation, reproduction, etc., of Epson products is allowed.
7. Epson products have been designed, developed and manufactured to be used in general electronic applications and specifically
designated applications (“Anticipated Purpose”). Epson products are NOT intended for any use beyond the Anticipated Purpose that
requires particular quality or extremely high reliability in order to refrain from causing any malfunction or failure leading to critical harm
to life and health, serious property damage, or severe impact
on society, including, but not limited to listed below (“Specific Purpose”).
Therefore, you are strongly advised to use Epson products only for the Anticipated Purpose.
Should you desire to purchase and use Epson products for Specific Purpose, Epson makes no warranty and disclaims with respect to
Epson products, whether express or implied, including without limitation any implied warranty of merchantability or fitness for any
Specific Purpose. Please be sure to contact our sales representative in advance, if you desire Epson products for Specific Purpose:
Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and their control equipment (automobiles, aircraft,
trains, ships, etc.) / Medical equipment / Relay equipment to be placed on sea floor/ Power station control equipment / Disaster or
crime prevention equipment / Traffic control equipment / Financial equipment
Other applications requiring similar levels of reliability as the above
8. Epson products listed in this document and our associated technologies shall not be used in any equipment or systems that laws and
regulations in Japan or any other countries prohibit to manufacture, use or sell. Furthermore, Epson products and our associated
technologies shall not be used for the purposes of military weapons development (e.g. mass destruction weapons), military use, or any
other military applications. If exporting Epson products or our associated technologies, please be sure to comply with the Foreign
Exchange and Foreign Trade Control Act in Japan, Export Administration Regulations in the U.S.A (EAR) and other export-related
laws and regulations in Japan and any other countries and to follow their required procedures.
9. Epson assumes no responsibility for any damages (whether direct or indirect) caused by or in relation with your non-compliance with
the terms and conditions in this document or for any damages (whether direct or indirect) incurred by any third party that you give,
transfer or assign Epson products.
10. For more details or other concerns about this document, please contact our sales representative.
11. Company names and product names listed in this document are trademarks or registered trademarks of their respective companies.
