Epson ProSense J-307, Руководство пользователя

Страница: 27 / 96

Device sensors
GPS signal reception (GPS positioning)
GPS positioning
GPS positioning is the process by which the device receives a GPS signal and timing information to measure
routes, distance, pace, and other information.
To ensure accuracy of measurements, use the device under the following conditions in areas of good GPS signal
reception.
Scenarios in which GPS positioning is used
❏
GPS measuring (Run or Walk measurements)
❏
Time synchronization (SETTINGS Set by GPS , System Update Time )
Good signal reception conditions
Locations where you cannot receive signals Locations that are difficult to receive signals
Inside rooms or
buildings, or
underground In tunnels Under water Locations with
electronic
interference, such
as constructions
sites and heavy
traffic Near high-voltage
wires or television
towers, overhead
electric wires for
trains, and roads
with skyscrapers On water
Using the device for the first time
Before using the device for the first time after purchase, wait at least 15 minutes after initial GPS positioning
outdoors with no obstructions overhead while the device displays the Measurement screen. This improves
measurement accuracy.
J-307 User Manual
Setup
27