background image

Warning

Do not use or store this device in the following environments. Doing so may result in electric shock, fire, or
product malfunction and damage.

Locations exposed to extreme temperature/humidity

Near volatile substances

Dusty places

Near a fire

Near sources of magnetic energy such as TVs, speakers, and magnetic necklaces

Do not attempt to disassemble or repair this product. Doing so may cause electric shock or other accident.

Do not leave this product within reach of young children.

Use this product at your own risk. Seiko Epson shall not be liable for damages caused to the owner of the
device or any third party.

Caution

If you sweat while wearing this device, remove the device and then completely wipe sweat and any dirt off
your wrist and the device. Continuing to wear the device while wet with sweat or dirty may cause itchiness
and irritation.

This device is water resistant up to 5 bars of pressure. Do not press any buttons while the device is
underwater. This may effect the quality of the waterproofing.

Do not use the device while in a bath or sauna. Steam, soap, and minerals in the water could degrade water
resistance or cause rust.

USB Charging clip precautions

Warning

Do not use a damaged USB Charging clip. Doing so may result in fire or product malfunction./

Do not use the USB Charging clip if dusty or dirty. Doing so may result in fire.

Do not use the USB Charging clip if you notice any smoke, odor, or abnormal noise. Doing so may result in fire.
If some abnormalities occur during use, immediately disconnect the USB Charging clip cable and contact a
repair center.

Do not use USB Charging clip if any foreign substances or water/other liquids get inside the device. Doing so
may result in electric shock or fire./ If this happens, immediately disconnect the USB Charging clip cable and
contact a repair center.

Disconnect the cable when the USB Charging clip is not in use. Metal or dust/foreign matter collecting on the
terminals may result in burns or fire.

Do not use the USB Charging clip to charge other devices. This device must be charged only with the USB
Charging clip. Do not use any other charging method. Doing so may result in product malfunction, electric
shock, or fire.

J-307     User Manual

Overview of the ProSense

12

Содержание ProSense J-307

































































































Отзывы: