Epson PP 408, Руководство пользователя

Страница: 28 / 135

Configuring the printer Configuring the printer
3-5 3-6
3.3 Explanation of the printout on the previous page 3.4 Explanation of Individual Menu Items
The heading PRINT OUT gives information about the VERSION of the printer's Main Functions
firmware. The following main functions are available:
The next two headings are followed by two columns of standard settings:
S
MACRO SELECT
S
INTERFACE - for communication between the computer operating system printer settings for different applications. For example: Application A needs
and the printer it is necessary to have the same communication settings or 12" paper and in Application B banking checks are printed.
features. The standard settings are:
S
Buffer 8 Kbyte
S
CHANGE MACRO
S
Word Length 8 Bit In this part it is possible to create a macro for specific application needs (for
S
I/F Type Shared detail information see chapter Function CHANGE MACRO beginning on the
S
Baud Rate 9600 Bit/s next page).
S
Parity Bit Even
S
Protocol DTR
Note:
Most parameters can be set via the control panel or via escape sequences
S
Auto-Status No from the host computer.
S
ADJUSTMENT - all parameters are for adjustment of the printer and the
S
INSTALLATION
paper (see also the following pages). In the first sub-function named INTERFACE you can manipulate parameters
The last part of the printout is a list with all MACRO settings. In this case In the second sub-function labelled ADJUSTMENT you can optimize your
MACRO 4 is marked with an asterisk (
’
) which identifies it as the active macro. printouts.
If you do not save new settings, they are lost when you turn the printer OFF and
S
SAVE
ON. Any desired changes to the default settings can be saved here. After power
If you make modifications via the application in the active macro you will find the
new settings under the heading CURRENT SETTINGS . While this function is executed the display flashes SAVING NOW .
To select one of the four macros which can be used for changing quickly the
to enable communication with the host.
ON and OFF the new settings are still activated.