Printer Operation
Printer Operation
2-7
2-8
There are two possibilities for the displacement to become active:
S
START
/STOP Key
(93)
S
If a positive displacement is set before starting the print job the printer
S
turns off the STOP indicator
will move the paper into the right position first and then start printing.
S
makes the printer ready for operation
S
If the displacement is set during a print job, the printer prints the
S
either starts the printout or self-test functions when selected (see
contents of the print buffer. Afterwards, the displacement will become
MENU mode) or causes the interface status to change to
READY
or
active. All following data are at the new position.
BUSY
(displayed)
S
Pressing [START/
STOP
]
(93)
The printer changes into the
LOCAL
mode (displayed) and turns on the
2.3
Menu Mode
STOP indicator (52). All printer and paper handling operations are
stopped. After pressing
again, the printer quits the
LOCAL
or
Menu
Instead of having a multitude of dip switches, all operator selectable features
mode.
are accessable via the control panel and combined in the printer MENU.
2.2.3
Meaning of the Keys in the LOCAL Mode
This feature provides:
S
Lower Row Keys
S
easy handling of configuration (interface, etc.)
S
Insert or Eject Key
(90)
S
quick parameter changes during an application
After pressing the Insert/Eject key, fanfold paper from the park position
S
a
SAVE
function to make changes permanent (until purposely reset),
is fed into the print position, and fanfold paper from the print position is
facilitating changes in default settings.
fed into the cut/tear off position (depending on the setting or the printer
type). Paper that has been retracted into the cut/tear off by the
The menu has several levels:
Insert/Eject key will be moved automatically into the print position once
S
The first level contains the Main Functions
the printer receives a print command.
S
Level 2 contains Sub-Functions
Note:
This key is not active while the top cover is open.
S
Level 4 allows to select/confirm values
S
The Paper Feed Key
(91)
and the
For easy selection of paper source, font, pitch and macro, please refer to the
Reverse Paper Feed Key
(92)
Quick Settings section in this chapter.
The paper moves / " (0.28 mm) in the direction of the arrows. Holding
1
90
down the key results in continuous feeding.
Forward movement of paper from the park position is stopped at the
print position. Forward movement of paper from the print position is
stopped at the tear off position or it will be cutt off (depending of the
setting or of the printer type).
Backward movement of paper is stopped at either the park position, the
print position or the tear off position.
S
exits the MENU mode.
S
Level 3 allows to select/confirm values and contains further Sub-Functions
Содержание PP 408
Страница 58: ...14073 Appendix A to G for Printer ...
