background image

Welcome

5

Using Your Documentation

Your owner’s kit includes warranty information, your PrivateLine

®

 

Support card, Quick Setup sheet, and this User’s Guide. See the Quick 
Setup
 sheet to connect the projector to a video source such as a DVD 
player or VCR. (If you are connecting the projector to a computer, see 
Appendix A in this book for detailed instructions.) 

This User’s Guide contains all the other information you need to use 
your projector. Please follow these guidelines as you read through the 
book:

Warnings must be followed carefully to avoid bodily injury.

Cautions must be observed to avoid damage to your equipment.

Notes contain important information about your projector.

For More Information

If you need help not covered in the documentation, try the following:

Built-in help system

Press the 

Help

 button on the projector or the remote control to 

get instant help while using the projector. See page 48 for details.

support.epson.com

Download FAQs and e-mail your questions to EPSON support.

EPSON PrivateLine Support service

This service requires a PIN code, which is provided on a special 
card included in your owner’s kit. To get help fast from EPSON, 
call (800) 637-7661 and enter the PIN on the card in your 
owner’s kit. If your projector needs to be repaired, EPSON 
provides overnight replacement service in most parts of the U.S. 
and Canada. 

You can also take advantage of EPSON’s automated support 
services 24 hours a day. See page 59 for more information.

Содержание PowerLite TW-100




























































































Отзывы: