3.
Connect the other end to the projector's
HDBaseT
port.
See the documentation that came with the HDBaseT transmitter for instructions on connecting it to
your video device or computer.
4.
Turn on the projector and HDBaseT transmitter.
Note:
To enable communication from the Ethernet and serial ports on the transmitter, select
On
as the
Control Communications
setting in the projector's Extended menu. Turning on this setting disables the
projector's
LAN
,
RS-232C
, and
Remote
ports.
Parent topic:
Projector Connections
Related references
Projector Setup Settings - Extended Menu
Connecting to an External Computer Monitor
If you connected the projector to a computer using a
Computer
or
BNC
port, you can also connect an
external monitor to the projector. This lets you see your presentation on the external monitor even when
the projected image is not visible.
If you want to output images to an external monitor when the projector is turned off, you need to select
Communication On
as the
Standby Mode
setting and
Always On
as the
A/V Output
setting in the
projector's Extended menu.
Note:
Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly.
47
Содержание PowerLite Pro Z10000UNL
