2.
Press the
Lens
button on the projector's control panel or remote control.
3.
Press the
Lens
button repeatedly until
Adjust Focus
is displayed on the screen.
4.
Press and hold the left or right arrow buttons on the projector's remote control or use the thumbstick
on the control panel to focus the image.
5.
Press the
Esc
button on the projector's control panel or remote control when finished.
Parent topic:
Using Basic Projector Features
Adjusting the Color Convergence (Panel Alignment)
You can use the Panel Alignment feature to manually adjust the color convergence (the alignment of the
red, green and blue colors) in the projected image.
Note:
Allow your projector to warm up for at least 10 to 15 minutes and make sure the image is in focus
before you use the Panel Alignment feature. The projected image should be a minimum of 60 inches
(152 cm) diagonally and the projection surface should not be colored or textured, otherwise the
adjustment grids will be difficult to align.
1.
Turn on the projector.
2.
Press the
Menu
button.
3.
Select the
Extended
menu and press
Enter
.
62
Содержание PowerLite Pro Cinema LS10000
