Pairing the 3D Glasses with the Projector
Pair the glasses with the projector to establish communication between them for 3D viewing.
1.
Turn on the projector.
2.
Set the image source to HDMI or WirelessHD (PowerLite Pro Cinema LS9600e).
3.
Project a 3D image.
4.
Slide the power switch on the 3D glasses to the
On
position.
5.
Move the glasses within 10 feet (3 m) of the projector, then hold down the
Pairing
button on the
glasses for at least three seconds.
The status light on the glasses flashes green and red. If pairing is successful, the light turns green
for 10 seconds and then turns off.
Parent topic:
Viewing 3D Images
Related tasks
Selecting an Image Source
53
Содержание PowerLite Pro Cinema LS10000
