Epson PowerLite Home Cinema 3100, Руководство пользователя

Страница: 280 / 329

72
Solutions When You Cannot Connect Projectors Using Advanced Connection Mode
(Wired)
When you cannot connect the computer and the projector using Advanced Connection Mode over a
wired network, try the following solutions. If you cannot resolve the problem, contact your network
administrator.
• Check the status of the external devices used for the network connection or the environment in which
the network devices and the projector are located.
• Connect the network cable securely.
Note:
• Use a commercially available 100BASE-TX or 10BASE-T LAN cable.
• To prevent malfunctions, use a category 5 or higher shielded LAN cable.
• Check the projector's network settings.
• Set DHCP to Off . When DHCP is set to On , it may take some time to enter LAN standby status if an
available DHCP server is not found.
• Set the IP address, the subnet mask, and the gateway address for the projector correctly.
• Close network settings on the projector, and then return to the LAN standby screen.
• Check the computer's network settings.
• Enable LAN settings on your computer.
Windows Vista: Check Control Panel > System and Maintenance > Device Manager .
Windows 7, Windows 8, Windows 8.1, and Windows 10: Check Control Panel > Hardware and
Sound > Device Manager .
• Turn off the firewall. If you do not want to turn it off, register the firewall as an exception. Make the
necessary settings to open the ports. The ports used by this software are "3620", "3621", and
"3629".
• Check the software settings.
• Select the network adapter you are using from Switch LAN on the Set options screen. If the
computer has multiple LAN environments, a connection cannot be established unless the network
adapter is selected correctly.
• If you cannot find the projector you want to connect to using Automatic search , select Manual
search to specify the IP address.