Epson PLQ-35, Руководство пользователя

Страница: 51 / 75

Paper is too long. When the printer is in the PR2 mode, see “Clearing a Paper Jam” on
page 51 for instructions on ejecting paper. When you are in the
WNI4915 or EPSON Mode, press the
F1/Eject button. When you
are in IBM4722 mode, press the Offline button and then the F1/
Eject button. Make sure the page length of your paper is within the
range specified for single-sheet paper in “Paper/Media” on
page 68. Also check and adjust the paper size setting in your
application or printer driver. Contact your administrator for help.
The printer does not load passbook or does not feed it properly.
Cause What to do
Passbook is not loaded properly. See “Loading Passbooks” on page 21 for instructions on loading
passbooks.
Clearing a Paper Jam
If paper is not automatically ejected in the situations noted below, a paper jam may have occurred
inside the printer.
❏
When anything except for PR2 is selected as the Software or Software2 while Dual is selected as the
I/F Mode in Olivetti Mode, press the
Offline button and then the F1/Eject button.
❏
Press the F1/Eject button in EPSON Mode.
❏
When Dual is selected as the I/F Mode in Wincor Nixdorf Mode or IBM Mode, press the Offline
button and then the F1/Eject button.
Follow the steps noted below to clear the paper jam.
!
Warning:
If you have just used the printer, the print head may be hot; let it cool for a few minutes before
touching it.
PLQ-35 User’s Guide
Troubleshooting 51