Safety Instructions
5
When using LCD
❏
The LCD panel contains a few small bright or dark
spots. These are normal and do not mean that the
LCD monitor is damaged in any way.
❏
Only use a dry, soft cloth to clean the LCD panel.
Do not use liquid or chemical cleansers.
❏
If the LCD panel on your printer's control panel
is damaged, contact your dealer. If the liquid
crystal solution gets on your hands, wash them
thoroughly with soap and water. If the liquid
crystal solution gets into your eyes, flush them
immediately with water. If discomfort or vision
problems remain after a thorough flushing, see a
doctor immediately.
When using the optional Bluetooth Photo
Print Adapter
Refer to the Bluetooth Photo Print Adapter's
documentation for the safety instructions.
When using the optional battery
❏
If battery acid gets into your eyes or on your skin,
immediately rinse the affected area thoroughly
with water and seek medical treatment. If a
battery is swallowed, seek medical treatment
immediately.
❏
Use only an Epson Li-ion battery model EU-112
for this printer according to the directions in the
user documentation. Replacing the battery with
an incorrect model may cause an explosion.
❏
Use only AC adapter model A361H to charge the
battery and operate the printer.
❏
Do not charge or use the battery with devices
other than the specified product. Using the
battery with other devices may damage the
battery or other devices, or may cause an
explosion.
❏
To protect against short circuits, do not remove
the outside case of the battery.
❏
Do not handle the battery with wet hands or use
them near water.
Содержание PictureMate 100
Страница 6: ...vi ...