background image

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted 
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior 
written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only 
for use with this EPSON product. EPSON is not responsible for any use of this information as applied to other 
products.

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or 
third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: 
accident, misuse, or abuse of this purduct or unauthorized modifications, repairs, or alterations to this 
product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION’s operating 
and maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the use of 
any options or any consumable products other than those designated as Original EPSON Products or EPSON 
Approved Products by SEIKO EPSON CORPORATION.

General Notice: Other product names used herein are for identification purposes only and may be trademarks 
of their respective owners. EPSON disclaims any and all rights in those marks.

Copyright © 2001 by SEIKO EPSON CORPORATION, Nagano, Japan.

For European Users

This product conforms to CE marking requirements in accordance with EC Directive 89/336/EEC.

Dieses Produkt entspricht den ßedingungen zur CE-Kennzeichnung in Übereinstimmung mit der EG-
Richtlinie 89/336/EWG.

Ce produit est estampillé CE et conforme aux directives européennes 89/336/EEC.

Este producto cumple los requisitos de señalización de la CE, según lo dispuesto en las directivas 89/336/EEC 
de la CE.

Il prodotto è conforme ai requisiti CE ed alle direttive EC 89/336/EEC.

Este produto está em conformidade com os requisitos de etiquetagem CE nos termos da Directiva 
89/336/EEC.

Содержание P260













Отзывы: