2. While holding down the
LF/FF
button, turn on the printer.
The
PAUSE
light flashes.
3. Slide the left edge guide until it locks in place at the guide
mark. Next, adjust the right edge guide to match the
width of your paper.
4. Slide a sheet of paper down firmly between the edge
guides until it meets resistance. The printer loads the
sheet automatically and begins to print.
F
Caution:
Always close the printer cover while the printer is printing.
The printer cover helps the paper feed.
5. To stop printing temporarily, press the
PAUSE
button.
6. To end the self test, make sure the printer is not printing.
Press
LF/FF
to eject the sheet; then turn off the printer.
The printer prints characters in each font in the order the
fonts appear on the control panel
6SHFLI\LQJýWKHý3ULQWHUý7\SHý
Most software programs let you specify the type of printer
you use so that the program can take full advantage of the
printer’s features. Many of these programs provide an
installation or setup menu that presents a list of printers.
To take full advantage of your printer’s features, choose
LX-300. If LX-300 is not listed, contact your software
manufacturer for an update that includes the LX-300. Until
you receive an update, choose another printer as close to the
top of the list as possible.
LX-300
LX-810
JX-80
Color
LX-850
Not color
EX-800
LX-800
LX-80/86
FX-850
FX-86e/800
If none of these printers is listed among your program’s
options, select the first one available from the following:
any FX printer, EPSON printer, and Draft printer.
$GMXVWLQJýWKHý/RDGLQJý3RVLWLRQ
The loading position is the position of the paper when the
printer loads it. If printing is too high or low on the page,
change the loading position with the micro-feed feature.
1. With paper loaded, hold down the
PAUSE
button until the
printer beeps once and the
FONT
lights begin to flash.
2. Press the
LF/FF
button to feed the paper forward, or press
the
FONT
button to feed the paper backward. (Press either
button as many times as necessary until you reach the
desired position.)
3. To complete the adjustment, press the
PAUSE
button or
send data from your computer.
(3621ý/;ðêíí
(3621ý/;ðêííðå
éîëëîäé
,QNý-HWý3ULQWHUV
