manualshive.com logo in svg

Epson LT-286, Руководство пользователя

На нашем веб-сайте вы можете бесплатно загрузить руководство пользователя для принтера Epson LT-286. Этот надежный и многофункциональный устройство предоставляет высокое качество печати и простоту использования. Узнайте как настроить и использовать ваш принтер, загрузив руководство с нашего сайта.

Поделиться
Скачать
background image

FCC COMPLIANCE STATEMENT FOR AMERICAN USERS

This equipment generates and uses radio frequency energy and if not installed

and used properly, that is, in strict accordance with the manufacturer’s
instructions, may cause interference to radio and television reception. It has
been type tested and found to comply with the limits for a Class B computing

device in accordance with the specifications in Subpart J of Part 15 of FCC
rules, which are designed to provide reasonable protection against such

interference in a residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does

cause interference to radio and television reception, which can be determined

by turning the equipment off and on, you are encouraged to try to correct the

interference by one or more of the following measures:

l 

Reorient the receiving antenna

l 

Relocate the computer with respect to the receiver

l 

Move the computer away from the receiver

l 

Plug the computer into a different outlet so that the computer and

receiver are on different branch circuits.

If necessary, consult your dealer or an experienced radio/television technician

for additional suggestions. You may find the following booklet prepared by the
Federal Communications Commission helpful:

“Television Interference Handbook”

This booklet is available from the U.S. Government Printing Office,
Washington DC 20402. Stock No. 004-000-00450-7

Note: If the interference stops, it was probably caused by the

computer or its peripheral devices. To further isolate the problem:

Disconnect the peripheral devices and their input/output cables one at a
time. If the interference stops, it is caused by either the peripheral
device or its I/O cable. These devices usually require shielded I/O cables.
For Epson peripheral devices, you can obtain the proper shielded cable
from your dealer. For non-Epson peripheral devices contact the
manufacturer or dealer for assistance.

WARNING:

This equipment has been certified to comply with the limits for a Class B
computer device, pursuant to Subpart J of Part 15 of FCC Rules. Only
peripherals (computer input/output devices, terminals, printers, etc.)
certified to comply with the Class B limits may be attached to this computer.
Operation with non-certified peripherals is likely to result in interference to
radio and TV reception.

The connection of a non-shielded equipment interface cable to this
equipment will invalidate the FCC Certification of this device and may cause
interference levels that exceed the limits established by the FCC for this
equipment.

Содержание LT-286





























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для LT-286

FabiaTech FX5507 User Manual preview
FX5507
Бренд: FabiaTech Страницы: 79
Acewell ACE-6000 Series User Manual preview
ACE-6000 Series
Бренд: Acewell Страницы: 2
Atari 600XL Connection Instructions preview
600XL
Бренд: Atari Страницы: 16
Beckhoff CX52 0 Series Manual preview
CX52 0 Series
Бренд: Beckhoff Страницы: 79
LDI Spaces SAFCO MUV 1926 Assembly Instructions preview
SAFCO MUV 1926
Бренд: LDI Spaces Страницы: 5
Dell EC280 Owner'S Manual preview
EC280
Бренд: Dell Страницы: 77
Sony PCV-RZ14G Online Help Center (VAIO User Guide) Specifications preview
PCV-RZ14G Online Help Center (VAIO User Guide)
Бренд: Sony Страницы: 1
Sony PCV-RZ10CG Spec Sheet preview
PCV-RZ10CG
Бренд: Sony Страницы: 2
Sony PCV-RXA842 Online Help Center (VAIO User Guide) Specifications preview
PCV-RXA842 Online Help Center (VAIO User Guide)
Бренд: Sony Страницы: 1
Sony PCV-RX820 Online Help Center (primary ) Specifications preview
PCV-RX820 Online Help Center (primary )
Бренд: Sony Страницы: 1
Sony PCV-RX780 Specifications preview
PCV-RX780
Бренд: Sony Страницы: 1
Sony PCV-RX770 Computer User Guide (primary manual) Specifications preview
PCV-RX770 Computer User Guide (primary manual)
Бренд: Sony Страницы: 1
Sony PCV-RX753 Specifications preview
PCV-RX753
Бренд: Sony Страницы: 2
Sony PCV-RX742 Online Help Center (primary manual) Specifications preview
PCV-RX742 Online Help Center (primary manual)
Бренд: Sony Страницы: 1
Sony PCV-RX740 Specifications preview
PCV-RX740
Бренд: Sony Страницы: 1
Sony PCV-RX690G User Specifications preview
PCV-RX690G User
Бренд: Sony Страницы: 1
Sony PCV-RZ-M Series VAIO Service Manual preview
PCV-RZ-M Series VAIO
Бренд: Sony Страницы: 39
Sony PCV-RX830 Service Manual preview
PCV-RX830
Бренд: Sony Страницы: 26

Бренды по названию

Популярные бренды

Загрузить еще бренды