![background image](http://html.mh-extra.com/html/epson/icdmini-3-0/icdmini-3-0_user-manual_107780018.webp)
Appendix A Differences from ICDmini Ver. 2.0
ICDmini Ver. 3.0 User Manual
Seiko Epson Corporation
15
(Rev. 1.0)
Appendix A Differences from ICDmini Ver. 2.0
The table below lists the differences between the ICDmini Ver. 2.0 and Ver. 3.0.
Table A.1 Differences between the ICDmini Ver. 2.0 and Ver. 3.0
Item
ICDmini Ver.2.0 (S5U1C17001H2100) ICDminiVer.3.0 (S5U1C17001H3100)
Core CPU supported
S1C17/S1C33
S1C17
Flash memory programming
voltage (V
PP
) output
Available
Available
V
PP
voltage
6.0 V to 8.0 V variable voltage
(when S1C17 is selected)
7.0 V or 7.5 V selectable fixed voltage
Target system I/O interface voltage
1.8 V or 3.3 V internal voltage, or 1.0 V
to 5.5 V supplied from the target system
3.3 V internal voltage or 1.2 V to 5.5 V
supplied from the target system
Target system interface voltage
output
1.8 V or 3.3 V (max.100 mA)
3.3 V only (max.100 mA)
Flash memory programming power
supply cable
Available
Integrated in the target system
interface connector and cable
Flash memory programmer mode
(multi-programmer support)
Available
Unavailable
Reset switch
Available
Unavailable
LED
Four 7-color LEDs
Two single color LEDs (green and red)
BRKIN and GND pins
Available
Unavailable
USB connector
Standard-B
Mini-B
Supplied cable
One 4-pin target system connection
cable, two 4-pin flash memory
programming power supply cables, and
one USB (Standard-A to B) cable
One 10-pin target system connection
cable *1 and one USB (Standard-A to
Mini-B) cable
MCU supported
S1C17 and S1C33 Family MCUs
S1C17 Family MCUs except
S1C17803 (when used with a 24 MHz
or higher OSC3 clock)
Firmware update
Update using debugger commands
Update using a file explorer on the
host computer
*1 Includes a flash memory programming power supply pin