Function Settings
This chapter explains the first settings to make in order to use each function of the device.
In this topic, the procedure for making settings from the administrator’s computer using Web Config is explained.
Web Config (Web Page for Device)
About Web Config
Web Config is a browser-based application for configuring the printer's settings.
To access Web Config, you need to have first assigned an IP address to the printer.
Note:
You can lock the settings by configuring the administrator password to the printer.
Accessing Web Config
There are two methods to access Web Config. JavaScript must be enabled in the browser.
Entering IP address
Start EpsonNet Config, and then double-click the printer in the list.
Enter the printer's IP address into a web browser. When accessing Web Config via HTTPS, a warning message will
appear in the browser since a self-signed certificate, stored in the printer, is used.
❏
Accessing via HTTPS
IPv4: https://<printer IP address> (without the < >)
IPv6: https://[printer IP address]/ (with the [ ])
❏
Accessing via HTTP
IPv4: http://<printer IP address> (without the < >)
IPv6: http://[printer IP address]/ (with the [ ])
FX-890IIN/FX-2190IIN/FX-2175IIN Network Guide
Function Settings
20