Epson Expression 10000XL
5/04
Epson Expression 10000XL - 5
Scanner Lights
You can diagnose some problems by checking the scanner’s
lights.
Scanning with EPSON Scan
The EPSON Scan software offers three scanning modes:
❏
Home Mode
makes scanning quick and easy, and provides
excellent results for all types of documents. Use when
advanced control over image quality settings is not required.
❏
Office Mode
is ideal for scanning business documents
containing text or graphics, with or without color. Choose
this mode to scan multi-page documents on the optional
automatic document feeder, or when scanning for OCR
(optical character recognition) to create editable text.
❏
Professional Mode
gives you the greatest control over image
color and quality. Lets you manually adjust any setting,
including the histogram setting, tone, color depth, balance,
saturation, brightness, and contrast.
You can open EPSON Scan from any TWAIN-compliant
imaging application, such as Photoshop Elements (included
with the scanner); this lets you scan images into the
application. Or you can use EPSON Scan in “standalone”
mode to scan directly to a file on your computer’s hard drive.
Placing the Original Document
Follow these steps to position a photo or single-page document
for scanning. (If you want to scan several photos at a time, a
multi-page document, or film or slides, see the
User’s Guide
.)
1. Raise the scanner cover and place the document face down
on the document table. Place it in the upper-left corner,
aligning it with the edges of the glass.
2. Close the cover, being careful not to move the document.
Tip:
If the edges of the document don’t scan, move it in
about 1/16 of an inch (1.5 mm) from the edges of the glass.
You can raise or remove the document cover if you need to
scan a thick item—such as a photo in an album—that
doesn’t fit under the cover. Simply lift the back of the cover
straight up. When you reattach the cover, line up the hinge
pins with the positioning holes and lower the cover into
place.
Light
Scanner Status
Ready
light is on
or flashing.
The green
Ready
light is on when the scanner is
ready to scan. It flashes when scanning is in
progress.
Error
and
Ready
lights are both
off.
Make sure your scanner is connected to a working
outlet, then press the
.
power button.
Error
and
Ready
lights are both
on.
The scanner has received an incorrect command
from your scanner software. Try scanning again. If
the problem persists, try reinstalling your scanner
software.
Error
and
Ready
lights are both
flashing.
If you’re using the automatic document feeder,
there may be a paper jam. Clear any jammed paper,
then close any open covers.
If this doesn’t solve the issue, there may be a
problem with the fluorescent lamp, or another
problem. Contact Epson as described in the
User’s
Guide
.
Error light
Ready light
a
Start button
.
Power button
