2
Safety Instructions
L
R4CD180
Setup Guide
Rev. C
SETUP.FM
A5 size
12/18/03
Proof Sign-off:
KOW N.Mizuno S.Koide
H.Kimura
NOC K. Lee
❏
Except as specifically explained in this
Setup Guide
and the
Online Reference Guide
, do not attempt to service the scanner
yourself.
❏
Unplug the scanner and refer servicing to qualified service
personnel under the following conditions:
❏
If the power cord or plug is damaged.
❏
If liquid has entered the scanner.
❏
If the scanner has been dropped or the case damaged.
❏
If the scanner does not operate normally or exhibits a
distinct change in performance. (Do not adjust controls
that are not covered by the operating instructions.)
❏
For Hong Kong and Singapore users:
Replace fuses only with those with of the correct size and
rating.
❏
If you plan to use the scanner in Germany, observe the
following:
To provide adequate short-circuit protection and
over-current protection for this scanner, the building
installation must be protected by a 10 or 16 Amp circuit
breaker.
Note for German-speaking users:
Bei Anschluss des Scanners an die Stromversorgung muss
sichergestellt werden, dass die Gebäudeinstallation mit einer
10A- oder 16 A-Sicherung abgesichert ist.
