Epson Equity 286 PLUS, Руководство пользователя

Страница: 35 / 263

When the system has successfully completed its self test, you see
the following prompt:
Press <Del> to start SETUP
Do not press any key yet. If MS-DOS has already been installed
on your system, you’ll see a prompt to enter the date. (For
information about loading the operating system, see your
MS-DOS Installation Guide or Reference Manual.)
If there is no operating system on your computer, you see an
error message. Ignore the message for now. Follow the
instructions below to turn off the computer and then go on to
Chapter 2 for instructions on running the SETUP program.
N o t e
If your computer’s configuration does not match the
information stored in the computer’s CMOS RAM (defined
through the SETUP program) you see an error message and a
prompt to press the
F1
key. Press
F1
to continue. You need
to run the SETUP program to correct the information. See
Chapter 2 for instructions.
Turning Off the Computer
When you are ready to turn off your system, reverse the
sequence of steps you followed to turn it on. Turn off the
computer first, then turn off the monitor and any peripheral
devices.
Now go on to Chapter 2 and follow the instructions to run the
SETUP program.
1-18 Setting Up
Your System