Epson EPL-8000, Руководство пользователя, Страница: 99 / 335

Level
2
Options
The setting you can select for
the
RX-BUFFER SIZE varies
depending on the amount of total RAM size in your printer. The
table below shows
the
available settings for the buffer sizes. X is
the
amount of RAM that the printer has.
If you
have
not installed any additional memory in your printer,
the
factory setting is 5KB.
Press to increase the buffer size or to decrease it. Press
the
buffer briefly
to change
the value
1K
at a time or hold the
button down to change the value rapidly.
After changing
the
buffer size, you need to execute SAVE&INIT
for
the
new setting to take effect. Press to execute or to
cancel the save and initialize operation.
Menu/submenu Available options
< or >
Note:
You can also save the settings with the P-CONFIG SAVE
option, and then initialize the printer. See the P-CONFIG SAVE
option later in this chapter.
SelecType 3-31