Epson Ensemble HD, Руководство пользователя

Страница: 74 / 132

74
7
Press and hold the button for the corresponding function on your old remote control until the screen
changes to either GOOD or FAILD (failed).
If GOOD appears at the top of the screen, you were successful. Continue by pressing the next button you
want to teach. Repeat steps 6 and 7 until you have programmed all the buttons you want.
If FAILD appears, try to teach the same button again by repeating steps 6 and 7. If you continue having
difficulties, try the following:
• Move to another room. Plasma TVs, sunlight, and halogen or quartz lighting can interfere with the
learning process.
• Although the old remote control seems to work fine, its batteries may be old. Use fresh batteries.
• Vary the distance between the remote controls gradually. Try 1/4 inch, 1 inch, 2 inches, and so on, up
to 4 feet.
• Repeatedly press the button on the old remote control instead of pressing and holding it during the
learning process.
8
Once you’ve finished, press the
MAIN
button to return to normal operation.
Cloning Your Remote Control
If you have two Ensemble HD remote controls and have customized one of them, you can copy your changes
from one to the other.
1 On each remote control, press and hold both the
MAIN
and
ENT
buttons for approximately three seconds.
The top of the screen displays SETUP.
Note
You have 30 seconds to complete each step. After that, the remote control returns to normal operation.
2 Select the
CLONE
option.
3
Line up the remote controls, head to head, one or two inches apart.
4
On the remote control you want to modify, select
RECV
(Receive). On the remote control whose settings
you want to keep, select
SEND
.
5
Select
START
on each remote control to begin cloning.
Note
Cloning can take several minutes to complete. You see
GOOD
displayed when the process is finished.
6 Once cloning is finished, press the
MAIN
button to return to normal operation.
GOOD FAILD