Epson Ensemble HD, Руководство пользователя

Страница: 58 / 132

58
Checking the Projector Lamp
The projector lamp lasts for up to 3000 hours. You can use the
Info
menu to check how long it’s been in use
(see below). It’s time to replace the lamp when:
• The projected image gets darker or starts to deteriorate.
• The message
Replace the lamp
appears on the screen when you start projecting.
• The projector’s warning light flashes red at half-second intervals (see below for details).
Note
Lamp life results will vary depending on mode selected, environmental conditions, and usage. Turn off this product when
not in use to prolong the life of the projector.
Checking the Info Menu
If you have access to the remote control that came with the projector (not the Ensemble HD remote), you can
use it to check the projector’s
Info
menu to find out how long the lamp has been in use. If you don’t have the
remote control, you’ll need to remove the cover on the bottom of the projector enclosure (see page 56) and
then use the buttons on the projector’s control panel to display the
Info
menu.
1
Press the
Menu
button on the projector’s remote control or on its control panel.
2 Use the menu navigation buttons to open the
Info
menu.
3
Check the
Lamp Hours
to determine how long the lamp has been in use.
Note
The
Lamp Hours
shows 0H until you’ve used the lamp for at least 10 hours.
Checking the Warning Light
If you suspect that the lamp needs to be replaced, check the warning light on the projector’s control panel.
1
Remove the cover on the bottom of the projector enclosure (see page 56).
2 Check the warning light, pictured below.
If the warning light is flashing red at half-second intervals, the lamp needs to be replaced. Contact your
dealer or a qualified servicer, or contact Epson for help (see page 69).
Warning
light