Epson Ensemble HD, Руководство пользователя

Страница: 13 / 132

13
Turning On the System
When you’re ready to watch a movie, you can lower the screen, turn on the projector, and turn on the
AV controller (with its built-in DVD player) with the touch of a button.
1 Make sure the MAIN menu is displayed on the remote control. If necessary, press the
MAIN
button.
2 Point the remote control at the screen and press the
ON
button to turn on the system. The screen comes
down and the projector and AV controller turn on.
Note
Make sure the remote control remains pointed at the screen until the system has turned on. (You see the icon flash
on the remote control screen while it’s turning on the system.) If the system does not turn on, see “Basic Operation
Problems” on page 61.
The projector lamp takes up to 30 seconds to achieve full brightness.
3 When you’re done using the system, make sure the MAIN menu is displayed on the remote control and
press the
OFF
button. The projector and AV controller turn off, and the screen raises up automatically.
Note
If you install additional components, such as a cable box or satellite receiver, you can set up the remote control to turn
them on with one button, too. See “Setting Up Macros” on page 77.
MAIN
DVD
CABLE
SAT
HD
RADIO
1 OF 2
ON
button
MAIN
button