Epson EMP-TS10, Руководство пользователя

Страница: 33 / 72

Settings and Useful Functions
31
This function lets you enlarge or reduce selected areas of images.
Procedure
1
Press the [E-Zoom] button on the remote
control.
A cursor (cross) indicating the center point for the
area to be enlarged will appear on the screen.
2
Move the cross to the area of the image
that is to be enlarged or reduced.
Tilt the [Enter] button on the remote control to
move the cross.
3
If you press the right side of the [E-
Zoom] button, the image will be
enlarged centering around the cross. If
you press the left side of the [E-Zoom]
button, the area of the image that was
enlarged will then be reduced in size
again.
You can scroll around the image by tilting the
[Enter] button.
To cancel the zoom, press the [Esc] button.
E-Zoom
••••
The selected area can be enlarged to between 1 – 4 times, in 25 steps of x 0.125.
••••
If a sub-screen has been set using the P in P function, the enlargement function is applied to
both the main screen and the sub-screen.
••••
If the E-Zoom function is in use, the projector's buttons cannot be used to perform adjustments
such as keystone correction, tracking adjustment and sync adjustment.
••••
If the E-Zoom function is used while the keystone correction amount is near the limit value, the
keystone correction amount may change.
Remote control
cross
Shows enlargement ratio
Reduction Expansion
A/V Mute E-Zoom
Freeze P in P