background image

120

User’s Guide

All rights reserved. No part of this publication may be reproduced, 
stored in a retrieval system, or transmitted in any form or by any means, 
electronic, mechanical, photocopying, recording, or otherwise, without 
the prior written permission of SEIKO EPSON CORPORATION. No 
patent liability is assumed with respect to the use of the information 
contained herein. Neither is any liability assumed for damages resulting 
from the use of the information contained herein.

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable 
to the purchaser of this product or third parties for damages, losses, 
costs, or expenses incurred by the purchaser or third parties as a result 
of: accident, misuse, or abuse of this product or unauthorized 
modifications, repairs, or alterations to this product, or (excluding the 
U.S.) failure to strictly comply with SEIKO EPSON CORPORATION’s 
operating and maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable against any 
damages or problems arising from the use of any options or any 
consumable products other than those designated as Original EPSON 
Products or EPSON Approved Products by SEIKO EPSON 
CORPORATION.

General Notice:

 

EPSON is a registered trademark of SEIKO EPSON CORPORATION. 
EasyMP is a trademark of SEIKO EPSON CORPORATION.
Macintosh, Mac, and iMac are registered trademarks of Apple 
Computer, Inc.
IBM is a registered trademark of International Business Machines 
Corporation.
Windows and Windows NT are registered trademarks of Microsoft 
Corporation in the United States of America.
Dolby is a registered trademark of Dolby Laboratories.
Cisco Systems is a registered trademark of Cisco Systems Inc. in the 
United States of America and other countries.
Pixelworks and DNX are trademarks of Pixelworks Inc.
Portions of this software are based in part on the work of the 
Independent JPEG Group.
Portions Copyright©2003 Instant802 Networks Inc. All rights reserved.
Other product names used herein are also for identification purposes  
only and may be trademarks of their respective owners. EPSON 
disclaims any and all rights in those marks.
This product uses open source software.

Copyright 

2004 by SEIKO EPSON CORPORATION

Содержание EMP-732


























































































































Отзывы: