Operation Problems
No image appears on the screen
•
After you press the [
t
] Power button, wait a few moments for the
image to appear. It takes about 20 seconds for the document camera to
output an image.
•
Make sure your projector is connected.
s
If you're connecting it through a computer, see
.
•
If you've connected a laptop, see "Problems Connecting a Laptop"
•
The document camera may be set to display an image from your
computer. Press the [Source] - [
] button on the document camera or
remote control to display the live camera image.
•
Select the correct source on your projector. The source refers to the
port on the projector to which you've connected the video cable. If
you're using a VGA cable, the source may be called something like
"Computer" or "PC".
•
Make sure your projector is turned on and not in sleep mode. Make
sure its picture has not been "muted" or turned off.
•
If you made a USB connection, the document camera's
USB Mode
setting may be set to
Mass Storage
.
You need to change this setting to
Application
. First disconnect the
USB cable, then reconnect to the projector using a VGA cable,
composite video cable, or HDMI cable. Press the [Menu] button and
select
Function
>
USB Mode
, then change the setting to
Application
.
Now you can use the USB cable to display the image.
Image Quality Problems
The image is fuzzy or out of focus
•
The document camera needs hard edges or sharp lines in the image to
be able to focus properly. If the image has only soft edges, try placing a
different document under the camera lens while adjusting the focus. Or
focus the image manually with the
Focus
adjustment in the
Image
menu.
s
•
Make sure the lens is at least 10 cm (4 inches) away from the object
you're viewing.
•
If you're using a projector to display the image, check its focus.
The image brightness or color isn't correct
•
To illuminate your document, slide the lamp switch on the side of the
camera head.
•
Press the [
] or [
] button to increase or decrease image brightness.
•
Set the
White Balance
setting to
Auto
to adjust the color automatically.
s
If the color is still not correct, choose the setting for the type of
lighting you're presenting under (
Cloudy
,
Daylight
,
Fluorescent
, or
Incandescent
).
•
If the document camera was used with a microscope, be sure to turn
the
Microscope
setting off when you return to displaying ordinary
documents.
s
Other image problems
•
If the image is stretched or has black bars, you may need to change the
Output Resolution
in the
Function
menu.
a
If you think some settings may have been changed, you can use the
Reset
option to return all the image settings back to their standard
values except the
Output Resolution
setting.
s
Problems and Solutions
64
Содержание ELPDC20 Document Camera
